For example, if you haven’t received the OTA update, then you may manually install the firmware ZIP or EXE onto your device, after booting it to the RUU Mode.  Along the same lines, flashing these firmware comes in handy for the tech enthusiasts as well. If the device goes into a bootloop or bricked state, then they could easily unbrick it by flashing the firmware via Fastboot Commands. Likewise, if you are planning to root the device, then this firmware file is of paramount importance. You would need to extract the stock boot.img file from the firmware, patch it via Magisk, and flash it via Fastboot. However, extracting the stock boot.img from an HTC RUU firmware file is no easy task. Moreover, since RUU is encrypted, it isn’t possible to access the files present in it. But there does exist a handy way out to decrypt it and hence access the various partition IMG files. And this guide shall make you aware of just that. Follow along.

How to Extract Boot.img from HTC RUU Firmware

The below instructions are listed under separate sections for ease of understanding. Make sure to follow in the exact same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

Downloads

Download the RUU EXE Firmware for your HTC Device. Here’s the link for M8 [Download], you may find other device links on XDA/Google.Download HTC RUU Decrypt Tool (Credits: XDA Recognized Developer Captain_Throwback): Download Link

Steps to Extract HTC RUU Firmware

Other useful HTC RUU Firmware Information

Before trying out any of the below-mentioned instructions, make sure to set up the ADB, which could be done as follows:

Boot HTC to Fastboot Mode

If you need to boot your device to the Fastboot or Bootloader Mode, then execute the below command:

Boot HTC to RUU Mode

If you want to boot your HTC device to the RUU Mode, then first boot it to Fastboot and then use the below command:

Flash RUU Firmware in HTC Devices

If you prefer to flash an RUU Firmware file having a ZIP extension, then boot your device to RUU mode and then use the below command:

Fix HTC “pre-hboot update: please flush immediately” Error

If you get the pre-hboot update: please flush immediately error message, then reboot your device to RUU mode, and then re-flash the ROM ZIP file again. The issue would be rectified. With this, we conclude the guide on how to extract the boot.img file from an HTC RUU firmware. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.

About Chief Editor

How to Extract Boot img from HTC RUU Firmware - 23How to Extract Boot img from HTC RUU Firmware - 6How to Extract Boot img from HTC RUU Firmware - 32How to Extract Boot img from HTC RUU Firmware - 52How to Extract Boot img from HTC RUU Firmware - 68How to Extract Boot img from HTC RUU Firmware - 2How to Extract Boot img from HTC RUU Firmware - 82